Thoreau On The Duty Of Civil Disobedience Rhetorical Analysis

Throughout the duration of the Mexican American war, beginning in 1846, many attempts were made to gather support for the conflict. One citizen, who resided in Connecticut, showed much more drastic distest to this war than many others. Henry David Thoreau took both passive and active efforts to voice his antagonism to the conflict by refusing to pay a tax that he believed supported the ideology behind the war that the United States was partaking in at the time. Later, he contrived an essay that outlined his philosophies of resistance, and created a basis for his means of protest that he believed should be placed in the mindset of the general public. Throughout Thoreaus essay, he illustrates his vast opposition to the involvement in the†¦show more content†¦In Thoreau’s continuing effort to describe the context for citizen rebellion, he beseeches how irrelevant public opinion is if it is not acted on. â€Å"How can a man be satisfied to entertain an opinion merely, an d enjoy it? Is there any enjoyment in it, if his opinion is that he is aggrieved?† (Thoreau). This question develops a sense of urgency that unless an opinion is acted on, first, there will be a complete absence of realistic results, but second, it simply exacerbates the issue that citizen opinion is against. To an extent, opinions are worthless if there is no motivation behind them, and Thoreau makes this very clear within his essay to assist the exigence behind his straightforward tone. Thoreau also addresses the idea of citizen integrity when he asks the question, â€Å"What is it but a tradition, though a recent one, endeavoring to transmit itself unimpaired to posterity, but each instant losing some of its integrity?† (Thoreau). This concludes that a failure to rebel against an unjust principle consequently impairs one’s integrity. Additionally, he contends that tradition is an influential motivator that removes the idea of rebellion from the mind of many citizens. Tradition in a community creates a cycle that manages to persuade people to not rebel against an unjust cause due to conformity that becomes

Final Reflection Free Essays

The most important lesson I feel I have learned from this course was in Week 1, when we discussed the value of keeping an open mind and viewing all aspects of a problem or situation from multiple perspectives versus limiting myself to my own perspective. Being able to apply what I have learned about creating strong arguments will make me more confident in writing research and persuasive papers for college. It will also undoubtedly assist me in any future career. We will write a custom essay sample on Final Reflection or any similar topic only for you Order Now I will be more able to confidently defend or argue my points of views and opinions in an unbiased way. This will, in turn, make me an overall better communicator. From the beginning of this course I have applied what I learned to the way I approached life in general and it has allowed me to better understand other people. Since Week 1, I have tried to implement what I learned from the â€Å"This Is Water† video ND I am happy to say it has already started to change my life for the better. Although I have always known it was best to view life In this way, PHI 103 has pushed me to be more aware of my thought processes. There Is a huge different between knowing or understanding something and putting it to practice. My goals are to keep increasing my awareness of other perspectives and to continue being objective upon approaching any argument. How to cite Final Reflection, Papers

Ma Case free essay sample

Operations and management were not successfully integrated as â€Å"equals† because of the entirely different ways in which the Germans and Americans operated: while Daimler-Benz’s culture stressed a more formal and structured management style, Chrysler favored a more relaxed, freewheeling style (to which it owed a large part of its premerger ? nancial success). In addition, the two units traditionally held entirely different views on important things like pay scales and travel expenses. As a result of these differences and the German unit’s increasing dominance, performance and employee satisfaction at Chrysler took a steep downturn. There were large numbers of departures among key Chrysler executives and engineers, while the German unit became increasingly dissatis? ed with the performance of the Chrysler division. Chrysler employees, meanwhile, became extremely dissatis? ed with what they perceived as the source of their division’s problems: Daimler’s attempts to take over the entire organization and impose their culture on the whole ? rm. We will write a custom essay sample on Ma Case or any similar topic specifically for you Do Not WasteYour Time HIRE WRITER Only 13.90 / page 3 While cultural con? ict often plays a large role in producing merger failure, it is often neglected when the bene? ts of a potential merger are examined. For instance, following the announcement of the AOLTimeWarner deal, a front-page Wall Street Journal article (Murray et al. 2000) discussed possible determinants of success or failure for the merger (such as synergies, costs, competitor reaction, and so forth). The only clear discussion of possible cultural con? ict is a single paragraph (out of a 60-column-inch article) revealing how the â€Å"different personalities† of AOL’s For instance, one joke told at Chrysler is: â€Å"How do you pronounce DaimlerChrysler? ‘Daimler’ the ‘Chrysler’ is silent. † Steve Case and TimeWarner’s Gerald Levin re? ect cultural differences between the two ? rms. A similar article (Jubak 2000) included a single paragraph entitled â€Å"What could go wrong with the synergy strategy. † Moreover, in these sorts of short, cursory, obligatory discussions of possible cultural con? ict, there is rarely discussion of what steps might be taken if there is dramatic con? ict. While culture may seem like a â€Å"small thing† when evaluating mergers, compared to product-market and resource synergies, we think the opposite is true because culture is pervasive.

Amygdalas Location and Function

Amygdala's Location and Function The amygdala is an almond-shaped mass of nuclei (mass of cells) located deep within the temporal lobes of the brain. There are two amygdalae, one situated in each brain hemisphere. The amygdala is a limbic system structure that is involved in many of our emotions and motivations, particularly those that are related to survival. It is involved in the processing of emotions such as fear, anger, and pleasure. The amygdala is also responsible for determining what memories are stored and where the memories are stored in the brain. It is thought that this determination is based on how huge an emotional response an event evokes. Amygdala and Fear The amygdala is involved in autonomic responses associated with fear and hormonal secretions. Scientific studies of the amygdala have led to the discovery of the location of neurons in the amygdala that are responsible for fear conditioning. Fear conditioning is an associative learning process by which we learn through repeated experiences to fear something. Our experiences can cause brain circuits to change and form new memories. For example, when we hear an unpleasant sound, the amygdala heightens our perception of the sound. This heightened perception is deemed distressing and memories are formed associating the sound with unpleasantness. If the noise startles us, we have an automatic flight or fight response. This response involves the activation of the sympathetic division of the peripheral nervous system. Activation of the nerves of the sympathetic division results in accelerated heart rate, dilated pupils, increase in metabolic rate, and increase in blood flow to the muscles. This activity is coordinated by the amygdala and allows us to respond appropriately to danger. Anatomy The amygdala is composed of a large cluster of around 13 nuclei. These nuclei are subdivided into smaller complexes. The basolateral complex is the largest of these subdivisions and is composed of the lateral nucleus, basolateral nucleus, and accessory basal nucleus. This nuclei complex has connections with the cerebral cortex, thalamus, and hippocampus. Information from the olfactory system is received by two separate groups of amygdaloid nuclei, the cortical nuclei, and medial nucleus. Nuclei of the amygdala also make connections with the  hypothalamus and brainstem. The hypothalamus is involved in emotional responses and helps to regulate the endocrine system. The brainstem relays information between the cerebrum and spinal cord. Connections to these areas of the brain allow amygdaloid nuclei to process information from sensory areas (cortex and thalamus) and areas associated with behavior and autonomic function (hypothalamus and brainstem). Function The amygdala is involved in several functions of the body including: ArousalAutonomic responses associated with fearEmotional responsesHormonal secretionsMemory Sensory Information The amygdala receives sensory information from the thalamus and from the cerebral cortex. The thalamus is also a limbic system structure and it connects areas of the cerebral cortex that are involved in sensory perception and movement with other parts of the brain and spinal cord that also have a role in sensation and movement. The cerebral cortex processes sensory information obtained from vision, hearing, and other senses and is involved in decision-making, problem-solving, and planning. Location Directionally, the amygdala is located deep within the temporal lobes, medial to the hypothalamus and adjacent to the hippocampus. Amygdala Disorders Hyperactivity of the amygdala or having one amygdala that is smaller than the other has been associated with fear and anxiety disorders. Fear is an emotional and physical response to danger. Anxiety is a psychological response to something that is perceived as dangerous. Anxiety can lead to panic attacks that occur when the amygdala sends signals that a person is in danger, even when there is no real threat. Anxiety disorders that are associated with the amygdala include Obsessive-Compulsive Disorder (OCD), Post-Traumatic Stress Disorder (PTSD), Borderline Personality Disorder (BPD), and social anxiety disorder. Sources Sah, P., Faber, E., Lopez De Armentia, L., Power, J. (2003). The Amygdaloid Complex: Anatomy and Physiology. Physiological Reviews, 83(3), 803-834. doi:10.1152/physrev.00002.2003

Understanding of electrical properties The WritePass Journal

Understanding of electrical properties 1. Introdution Understanding of electrical properties 1. Introdution1.1 Permeabilty 1.2 Porosity1.3 Electrical resistivity of concrete and its role in corrosion1.4 Test of Conductivity and Resistivity1.5 The electrical properties of cement and concreteRelated 1. Introdution The corrosion of steel in concrete is an electro-chemical process which creates a current flow causing rebars to dissolve therefore it could be assess the probability of corrosion of steel by evaluating the electrical resistance of the concrete. The factor is measured in terms of resistivity and expressed in Ohm. The electric resistivity of concrete is one of the major parameters which are controlled the propagation of reinforcement corrosion. Electrical properties are of concern in some specific applications such as railway ties or in structure in which concrete is used for protection from stray currents. Electrical resistance of concrete also influences progress of corrosion of embedded steel. Electrical properties are also of interest in studies of the properties of both fresh and hardened concrete and effective of admixture on it. Admixture generally do not reduce the resistivity of concrete, however, special addition can be use to vary the resistivity. For instance the addition to concrete of finally divided bituminous material, with subsequent heat treatment increase the resistivity, especially under wet conditions. It is common knowledge that there is a strong relationship between resistivity and permeability of concrete because basically we are interest in measuring the (pore connectivity which is function of resistivity) therefore it is Useful to clarify the permeability and the porosity. 1.1 Permeabilty Permeability is the ease with liquid or gases can travel through concrete. This property is of interest in relation to the water-tightness of liquid retaining structure and to chemical attack. Although there is no prescribed test by BS and ASTM, the permeability of concrete can be measured by means of a simple laboratory test but the results are mainly comparative and also it can related to electric resistivity measuring. In such test the sides of a concrete specimen are sealed and water under pressure is applied to the top surface only. When steady state condition has been reached the quantity of water flowing through the concrete sample in given time is measured. The permeability is not a simple function of its porosity, but depends also on size, distribution, shape, tortuosity, and continuity of the pores. .(Neville, 1995) 1.2 Porosity Strictly speaking, strength of concrete is fundamentally a function of volume void in it.  And it influence by entrapped air, capillary pores, gel pores and entrained air, if present. Fresh cement paste is a plastic network of particles of cement in water but, once the paste has set, it’s apparent or gross volume remains approximately constant. The paste consists of hydrates of the various cement compounds and of   Ca(OH)2, and the gross volume available for all these products of hydration consists of the sum of the absolute volume of the   dry cement and the volume of the mix water. In consequence of hydration, the mix water takes one of three forms: combined water, gel water and capillary water. 1.3 Electrical resistivity of concrete and its role in corrosion The electrical resistivity of concrete plays a major role in the steel rebar corrosion. If   the concrete has low resistivity (high conductivity), there is a high chance for corrosion cells to develop due to high ions concentrations   at the rebar level as opposed to low conductivity concrete. Corrosion of steel occurs because of electro-chemical action which is usually encountered when two dissimilar metal are in electro contact in presence of moisture and oxygen. However the same process takes place in steel alone because of the electrical-chemical potential on the surface which forms anode and cathodic regions.   When chlorides are present and with low resistivity of concrete, more ions are present for this process to mobilize and spread corrosion. The corrosion that take place is manifested as the formation of corrosion, which when it is constituted has an expansive reaction. When the corrosion expands, the concrete is no longer able to withstand the cracks and tensile forc es. Cracking and spalling fetches more water, air, and the ions entering very quickly when cracks are exists, and thus propagate the corrosion. Conversely, with a concrete has low permeability there are less chloride ions present, therefore the reaction is much slower if it develops at all. This induces a sustainable structure caused by the reduction of corrosion in the reinforcement.   The strongly alkaline nature of Ca (OH)2, of pH13 prevent the corrosion of the rebar by formation of a thin protective film of iron oxide on the metal surface, this protection is known as passivity. However, if the concrete is permeable to the extent that carbonation reaches the concrete in contact with steel or soluble chlorides can penetrate right up to the reinforcement, and water and oxygen are present, then corrosion of reinforcement will take place. The passive iron oxide layer is destroyed when pH falls bellow about 11 and carbonation lowers the pH to about 9. These reasons are why we are me asuring the resistivity of concrete is crucial in concrete building  Ã‚   containing steel rebar.Hammond (2010) 1.4 Test of Conductivity and Resistivity The 4-point electrical measurement testing method (Wenner linear array), figure (1.1) was used by geologists to measuring the resistivity of soil; it has since been revised for use in testing some materials such as concrete. This method is one of the most commonly technique is used for measuring concrete resistivity, by using AC current. This method contains a 4-poin probe device (as shown in fig1.1) used to measure the electrical resistivity of a concrete, a small AC current, passes between the outer contacts, the result is difference of potential  Ã‚   between the two inner contacts. The resistivity of concrete is calculating by equation (1.1). This technique for this purpose is relatively new, about 11 years ago has been used for measuring the resistivity of concrete. Ï  = 2aÃŽ   Where, Ï  is resistivity, a is spacing between probes, V is Potential difference between inner contacts, I is current passed between outer contacts. Figure 1.1 wenner 4-point resistivity meter 1.5 The electrical properties of cement and concrete The electrical properties of concrete and cement are extremely variable and it depend on the size and shape of the particle, the mix proportions including the type and grading of aggregate, the age and curing conditions and the moisture content as determined by water/cement ratio and subsequent drying or moisture absorption. The most important electric properties of concretes and cements are their resistance to both direct and alternating current and their dielectric strength. The resistance can be of two form, volume resistance and surface resistance and it is through a failure to separate those two that much of the early work on the subject exhibits such inconsistence. (Orchard,)   It is difficult to generalise on the resistance of cement paste and concrete as it is so variable and depends on many factors. As very rough guide, however, the volume resistivity of a freshly made cement paste may be 1/5000 of a megohm centimetre and may rise to 1/20 of a megohm centimetre after storing in air for long time.

I'M NOT SURE Essay Example | Topics and Well Written Essays - 1250 words - 1

I'M NOT SURE - Essay Example One of the things outsiders are most interested in is the philosophies. Thus, names like Laozi and Zhuangzi are now better known than before. This paper shall focus on the philosophies of these two, hitherto, less known philosophers. In the paper I shall explain their philosophies, draw comparisons and contrasts, and then endeavor to point out the superior philosophy among the two. Laozi was born and died during the reign of the Zhou dynasty. He was a firm believer in Taoism. He was a philosopher in then ancient China. His best work was the Tao Te Ching. This has led to him variously to be anointed as the founder of Taoism (pronounced as Daoism). There are many controversies regarding his main work referred to above. There are those who believe that the Tao Te Ching was a compilation of several Tao sayings by several other people over time (Ivanhoe & Norden 113). There is also a side that believes that this was entirely the work of Laozi. This is a situation very much like what Shakespeare faces today. However, there is no contention that he was incredibly gifted. To show how influential he might have been during his time, there are works that seem to suggest that Confucius consulted Laozi on matters of morals. There are even myths regarding his birth. Zhuangzi on the other hand, also referred to as Master Zhuang was born in 369 BCE and died aged 83 years old. He is said to have been greatly influenced by the Daoism espoused by Laozi. Therefore they shared several philosophical viewpoints but inevitably there were differences too. His main work was also named after him (Ivanhoe & Norden 135). Unlike Laozi, less is known about Zhuang. Conversely however, when the researcher starts to find material relating to these two philosophers, Zhuangzi’s philosophies are more readily available. They are also better explained than those of Laozi. The main reason why this is the case is because many people see Zhuangzi as the inheritor of Laozi’s crown.

Classical Theorists Essay Example | Topics and Well Written Essays - 500 words

Classical Theorists - Essay Example Wilson did not believe in the principle of equality, implying that claims to superior wisdom cannot validate law or rule and that legalize government is based on the people’s consent. Wilson acknowledges that that expertise and skill is the title to govern or administer. Despite this, Wilson suggests that under certain circumstances and at certain times, certain systems in America will work. Wilson trusted in the expertise as the best way to administer which is coupled with a reflective of republican view of self-government (Cook, 2007). Democracy has enlightened many people of the stubborn, ignorant, foolish, and selfish to people who emanate from distinct nationalities. Despite this, Wilson believed that there was still hope in that his aim was to champion for bureaucracy from wise and intelligent people, generate from them, and open for the people a bureau of economical, knowledgeable, and skilled administration. Wilson’s views on administration and politics were har d to sell to the American people because they preferred and believed in democracy. Wilson believes that administration must be perceptive to public view. When assessing the dichotomy of politics and administration, Wilson argues that the establishment of a public office must be viewed as a public trust (Cook, 2007). Wilson’s views on an effective administration were based on the idea that trained and skilled servants would teach the people by enhancing public belief/views and thereby even governing them. Therefore, according to Wilson, the bureaucracy would educate and enlighten voters. This implies that Wilson was more concerned about civil service, which he believed was self-sufficient and cultured to act aggressively, and in relate with the popular vote by ways of constant public advice and elections in order to attain arbitrariness of class struggle (Cook, 2007). Wilson’s approach to politics and administration was not ideal because it failed